Is Efflorescence Harmful? Removal and Prevention Tips

Efflorescence is a common problem that can occur on a variety of different substrate materials, including concrete, brick, and stucco. It is caused by the migration of water through the substrate, which carries dissolved minerals to the surface. These minerals then crystallize and form a white, powdery substance on the surface of the substrate, which can be unsightly and difficult to remove.

One product that can be used to effectively remove efflorescence from substrates is Efflo-Go, a chemical solution developed by Southeast Softwash. This product is specifically designed to break down and dissolve the minerals that cause efflorescence, making it easy to remove the substance from the surface of the substrate.

To use Efflo-Go to remove efflorescence, you will need to follow a few simple steps:

1. First, you should begin by thoroughly cleaning the surface of the substrate to remove any dirt, dust, or debris. This will ensure that the Efflo-Go is able to penetrate the substrate and effectively remove the efflorescence.
2. Once the surface is clean, you can begin applying the Efflo-Go. You can do this using a garden sprayer, a pressure washer, or a brush, depending on the size and shape of the substrate. Be sure to follow the manufacturer’s instructions for dilution and application rates, as the concentration of the solution may vary depending on the type of substrate you are treating.
3. After you have applied the Efflo-Go, allow it to sit on the surface of the substrate for the recommended amount of time. This will allow the solution to penetrate the substrate and dissolve the minerals that cause efflorescence.
4. Once the recommended amount of time has passed, you can begin to remove the efflorescence from the surface of the substrate. This can be done using a brush, a pressure washer, or by simply wiping the surface with a clean cloth. Be sure to remove all of the efflorescence, as any residue left behind may re-crystallize and cause the problem to return.
5. Once the efflorescence has been removed, you should rinse the surface of the substrate with clean water to remove any remaining traces of the Efflo-Go solution. This will help to prevent any residue from drying on the surface of the substrate and potentially causing further problems in the future.

 

 

 

What are the two types of efflorescence? 

 

Primary Efflorescence 

 

Primary efflorescence is a type of efflorescence that occurs when water and dissolved minerals migrate through a newly constructed substrate. This can occur when water is used to mix and cure concrete, or when moisture is introduced to a substrate through the use of wet curing methods. The water carries the dissolved minerals to the surface of the substrate, where they crystallize and form a white, powdery substance.

Primary efflorescence is typically more prevalent in newly constructed substrates and tends to occur within the first few months after the substrate has been built. It is most commonly seen on concrete, brick, and stucco, but can also occur on other types of substrates.

Primary efflorescence is generally not considered to be a structural problem and is more of an aesthetic issue. However, it can be unsightly and may need to be removed in order to restore the appearance of the substrate. There are a variety of different products and methods that can be used to remove primary efflorescence, including chemical solutions, pressure washing, and brushing.

 

Secondary efflorescence

 

Secondary efflorescence is a type of efflorescence that occurs when water and dissolved minerals migrate through an existing substrate, rather than a newly constructed one. This can be caused by a variety of factors, including leaks, poor drainage, high humidity, or improper sealing of the substrate.

Unlike primary efflorescence, which is typically more prevalent in newly constructed substrates, secondary efflorescence can occur at any time and is not limited to new construction. It is most commonly seen on concrete, brick, and stucco, but can also occur on other types of substrates.

Like primary efflorescence, secondary efflorescence is generally not considered to be a structural problem and is more of an aesthetic issue. However, it can be unsightly and may need to be removed in order to restore the appearance of the substrate. There are a variety of different products and methods that can be used to remove secondary efflorescence, including chemical solutions, pressure washing, and brushing.

It is important to address the underlying cause of secondary efflorescence in order to prevent it from recurring. This may involve fixing leaks, improving drainage, or properly sealing the substrate to prevent moisture from penetrating it.

 

Is Efflorescence Harmful?

 

Efflorescence is generally not harmful to humans or animals. The white, powdery substance that forms on the surface of the substrate is made up of crystallized minerals that have been carried to the surface by water. These minerals are typically not toxic and do not pose a health risk.

However, efflorescence can be a sign of excess moisture in the substrate, which can lead to other problems. For example, excess moisture can cause the substrate to weaken or deteriorate over time, leading to structural problems. In addition, excess moisture can create an ideal environment for the growth of mold, which can be harmful to humans and animals if inhaled.

 

8 Tips For Preventing Efflorescence 

 

1. Properly seal the substrate: Applying a sealant to the surface of the substrate can help to prevent moisture from penetrating it, which can reduce the risk of efflorescence.
2. Improve drainage: Poor drainage can lead to excess moisture in the substrate, which can cause efflorescence. Ensuring that water is properly drained away from the substrate can help to prevent this problem.
3. Fix leaks: Any leaks or sources of excess moisture should be repaired in order to prevent efflorescence.
4. Keep the substrate dry: Try to keep the substrate as dry as possible by avoiding activities that introduce moisture, such as wet curing of concrete or overwatering plants.
5. Use a dehumidifier: If you live in a humid climate, using a dehumidifier can help to reduce the amount of moisture in the air, which can reduce the risk of efflorescence.
6. Use a vapor barrier: A vapor barrier can help to prevent moisture from entering the substrate from the ground.
7. Insulate properly: Proper insulation can help to prevent moisture from entering the substrate from the exterior.
8. Use a water-repellent finish: Applying a water-repellent finish to the surface of the substrate can help to prevent moisture from penetrating it.

 

Does Efflorescence Smell? 

Efflorescence itself does not have a smell. It is a white, powdery substance that forms on the surface of the substrate when water and dissolved minerals migrate through the substrate and crystallize on the surface.

However, the presence of efflorescence may be an indication of excess moisture in the substrate, which can create an environment conducive to the growth of mold. Mold can have a musty or moldy smell, which may be noticeable if the efflorescence is located in a confined space or if the substrate is particularly damp.

If you notice a musty or moldy smell in addition to efflorescence, it is a good idea to address the underlying cause of the problem in order to prevent further issues from occurring. This may involve fixing leaks, improving drainage, or properly sealing the substrate to prevent moisture from penetrating it.

 

Efflorescence Vs White Mold

 

There are a few key differences between white mold and efflorescence that can help you determine which one you are dealing with.

Appearance: White mold tends to have a fuzzy or slimy appearance, while efflorescence is a dry, powdery substance.

Location: White mold is usually found on organic materials, such as wood or paper, while efflorescence is typically found on inorganic materials, such as concrete, brick, or stucco.

Cause: White mold is caused by the growth of fungi in damp conditions, while efflorescence is caused by the migration of water through the substrate, which carries dissolved minerals to the surface.

Removal: White mold can be difficult to remove and may require the use of specialized cleaning products or a professional service. Efflorescence can typically be removed using a variety of different methods, including chemical solutions like Efflo-Go, pressure washing, and brushing.

If you are still unsure whether you are dealing with white mold or efflorescence, it is a good idea to consult with a professional. They will be able to examine the substance and provide a more accurate diagnosis.

 

What are Efflorescence Salts?

Efflorescing salts are a type of salt that can cause efflorescence to form on porous building materials. Some common types of efflorescing salts include:

• Calcium carbonate
• Calcium sulfate
• Sodium sulfate
• Potassium sulfate
• Magnesium sulfate
• Calcium oxide

These salts are typically found in the water that is used to mix and cure concrete, or that is present in the soil or groundwater surrounding the building material. When the water migrates through the building material, it carries the dissolved salts with it, which can then crystallize on the surface and form efflorescence.

 

 

Conclusion

By following these steps, you can effectively remove efflorescence from a variety of different substrate materials using Efflo-Go from Southeast Softwash. This product is specifically designed to break down and dissolve the minerals that cause efflorescence, making it easy to remove this unsightly substance from the surface of the substrate.

In addition to using Efflo-Go to remove efflorescence, there are a few other things you can do to help prevent this problem from occurring in the first place. For example, you can try to minimize the amount of water that comes into contact with the substrate by sealing the surface or installing a waterproof barrier. You can also try to keep the substrate as dry as possible by fixing any leaks or drainage problems that may be contributing to the problem.

Overall, Efflo-Go from Southeast Softwash is an effective and convenient way to remove efflorescence from a variety of different substrate materials. By following the steps outlined above, you can easily and effectively remove this unsightly substance and restore the appearance of your substrate.

 

https://i0.wp.com/www.southeastsoftwash.com/wp-content/uploads/2023/01/IMG_2933.png?resize=300%2C225&ssl=1
https://www.southeastsoftwash.com/2023/03/15/is-efflorescence-harmful-removal-and-prevention-tips/

How To Clean Stucco The Right Way

A Step By Step Guide On How To Clean Stucco!

Stucco has been a popular choice for homeowners whether they’re looking to construct or renovate their houses. It looks attractive and doesn’t cost an arm as the material usually consists of sand, limestone, or concrete.

Once the construction or renovation has been done comes the critical part: taking care of its maintenance. Understanding how to clean stucco and the correct methods to wash it without causing harm is essential.

So, if you’re looking for the easiest ways to power wash a stucco house, find the methods discussed below.

How To Repair Stucco Cracks

Before we discuss the best cleaner for stucco or how to clean exterior stucco, inspect the walls and the entire house exterior thoroughly. If there is any crack appearing somewhere, fill that up or contact a professional if that seems deep.

Ignoring the cracks can leave space for water to drip inside when raining which can cause mold to grow. Follow any method discussed below that you find suitable as per the condition of the cracks.

1. Expand The Hole/Crack

Increase the crack’s width to at least 1/4 inch using a cold chisel and hammer to clean the debris or mold stuck inside.

The crack’s edges should be chiseled perpendicular to the wall. Back-cut the crack so its base is slightly broader than its top. After that, use a wire brush to remove all the loose dirt from the crack.

1. Clear Off Crumbling Material

Use your hands or a wire brush to remove any crumbly or falling material from the area around the crack. Additionally, keep in mind to get rid of any chalk, grime, or grease that can prevent the repair compound from adhering effectively.

Stucco Patch should be combined with water in a bucket, mixing tub, or container. Use a drill-mounted paddle to stir the mixture for a few minutes until it is smooth, consistent, and lump-free

1. Apply The Filling Mixture

Using a regular caulking gun, You can apply the stucco repair compound along the break. Stucco Patch should be combined with water in a bucket, mixing tub, or container. Use a drill-mounted paddle to stir the mixture for a few minutes until it is smooth, consistent, and lump-free.

Spend some time moisturizing the stucco around the crack and fill in the prepared mixture to apply inside the cracks for repair. You can also prepare the Rapid Set Stucco Patch immediately, provided you’ve already prepared the stucco surface.

After the repair has been cured for 24 hours, paint it with water-based paint, preferably in the house’s exterior color.

 How To Clean Exterior Stucco

Here we have the step-by-step procedure about how to clean the stucco.

No-one likes their stucco to look like this! Ew!

 

Lets get started!

 

1. Get The Cleaning Materials

It’s time to clean the stucco surface thoroughly once you’ve finished checking for cracks and fixing any that you find. Start with a thorough water rinse of the surface, as it is necessary to rinse with water first. Doing this can clean the surface of loose dirt, dust, and debris.

It is essential to learn how to wash stucco the right way. Once you’ve rinsed with water, get the materials you’ll need for stucco washing. The materials you need include;

•   Bleach (we use 12.5% industrial grade bleach at 1:1 ratio mixed with water) But you can use straight 6% homeowner grade bleach with no dilution.
•   Borax
•   Washing Detergent (Surfactant)
•   Bucket
•   Hose
•   Pressure Washer

Once you have grabbed all the required stuff, prepare yourself with safety goggles. When you pressure wash stucco, equip yourself with safety measures first.

2. Prepare A Cleaner

Now comes the second step, where you must prepare a stucco cleaner. There are a few options that you can choose from depending on your budget and preferences. You can pick any method you find suitable from the given options.

•   Bleach

To learn how to clean stucco with bleach, know that mold, mildew, and algae stains can be removed easily using a solution of one gallon of liquid bleach and one gallon of water.

Even though it is less successful at getting rid of dirt and grime; however, you can use it if there are mild stains. It can remove mild Stucco stains with a stiff scrub brush, diluted bleach, and water.

Start by applying mild pressure to the brush to prevent collapsing or harming the stucco. Being too forceful can harm stucco surfaces since they are porous and sensitive.

•   Borax

Natural mold-killing agent Borax is less harmful than bleach while yet being effective. Hot water, Borax, and dish soap are the components you’ll need for this cleaning solution. Combine Borax, 1-quarter cup of liquid dish soap, and 2 gallons of warm water.

Before you begin applying the cleaning solution, thoroughly wet the wall. Ensure the water strikes the wall at a 45 ° angle to avoid damage. Put the cleaning solution in a pump sprayer after dividing your wall into manageable parts.

Apply the cleaning solution to the first portion of the wall using the pump sprayer and rinse it off after the required time has passed.

•   Vinegar

Cleaning stucco with vinegar is also an excellent option for creating an influential homemade power wash stucco. Vinegar is known for its beneficial properties in cleaning grout and mold.

Using vinegar and baking soda solution is one of the best homemade stucco cleaners to help power wash stucco without strenuous efforts. Prepare a standard solution neither too thick that is nor too runny to clean stucco if there is efflorescence on your home exterior.

•   Cleaning Detergent

Can you pressure wash stucco safely without any issues with pressure wash? You can complete this task with a pressure washer instead of an ordinary garden hose and an attachment. Cleaning stucco can be a hassle-free process if you follow the correct method.

Before you power wash, apply any cleaner (detergent or homemade solution) over the stains with the help of a sponge on the stained stucco. Leave it for 15 to 20 minutes before pressure washing the stucco.

Moreover, you can easily remove grime and debris from stucco surfaces using a variety of cleaning agents. The best course of action is to spend money on an outside cleaner that is concentrated and designed exclusively for cleansing the outside of houses.

Also, always adhere to the manufacturer’s instructions for correctly mixing concentrated exterior cleaning.

3. Brush Strong Stains

Stucco pressure washing can be the right option for solid stains and mold on stucco but you must use a low pressure around 100psi. Also, the procedure of stucco stain removal must be done so that it doesn’t cause damage to the walls’ interior.

Where you find tough stains, brush any robust solution recommended by a professional and leave it to rest for some time. Let it soak for long enough until brushing can remove the stains easily.

4. Rinse Thoroughly

After brushing, use a pressure washer stucco to clean the exterior. Stucco cleaning can be easy with the proper equipment and the best quality material. After applying the solution according to the condition of your stucco, rinse it thoroughly as a final step.

 

 

 

Frequently Asked Questions 

•   Is stucco easy to clean?

If the entire exterior of your house is designed with stucco, then it would be best to get the house inspected by a professional. If there are cracks or holes, get them repaired and then follow any method you find suitable to clean the exterior.

•   How To Clean Stucco Walls And Interior

Use your vacuum’s wand extension and brush attachment to clean stucco walls and ceilings. Scrub gently after dipping the brush into the cleaning solution. Use a smooth cleaning brush to remove stains and fingerprints.

•   How do you soft wash a stucco house?

You can use any high-quality stucco stain remover and apply that on the stains for the time mentioned by the manufacturer. Once done, brush off the stains and rinse with a pressure washer at low pressure as a final step.

•   Should you pressure wash Stucco?

Yes, you can power wash, and power washing stucco house is one of the best methods for cleaning stucco in minimum time without any strenuous effort. However, be careful to keep the nozzle far enough away from the surface to stay safe. Soft Washing stucco is preferable to pressure washing as it uses less pressure.

•   What Is The Best Way To Clean Stucco?

Baking soda is one of the best exterior stucco cleaners that you can use an effective cleaning solution and combine baking soda to create a mixture. It multiplies the intensity of the cleaning agent and is not harsh, unlike many other chemicals.

•   How To Clean Green Algae On Stucco?

You can use a cleaning solution made of water, bleach, and dish soap to remove green algae from the stucco. Before washing it with water, brush the stains with a soft-bristle brush.

•   How do you get black stains out of stucco?

Black stains can cause due to rotten wood or rainwater dripping inside. It can eliminate this kind of stain by mixing water and washing detergent.

•   How Often Should You Clean The Stucco?

Wash your stucco at least once in two to three years and get it professionally inspected every three to four years.

The Bottom Line

Stucco is one of the most popular choices when constructing a house. The traditional material requires little maintenance, whether internal wall finishing or outside siding. Any homeowner may do the task with the proper supplies and equipment.

Before applying any chemicals or cleaning solution, check if there are any holes or cracks in the walls or exterior. Fill in the minor cracks using any high-quality crack-filler; however, consult a professional for severe cracks and holes.

Once you have the equipment and have prepared the cleaning solution, apply it over the stains and pressure wash for the best results.

 

 

 

 

 

 

 

The post How To Clean Stucco The Right Way appeared first on Southeast Softwash.

https://i0.wp.com/www.southeastsoftwash.com/wp-content/uploads/2023/01/How-To-Clean-Stucco.jpg?resize=493%2C278&ssl=1
https://www.southeastsoftwash.com/2023/02/14/how-to-clean-stucco-the-right-way/

How to Improve the Hiring Process for Your Cleaning Business

How to Improve the Hiring Process for Your Cleaning Business

 

Image Source: Pexels

 

Considering the events of recent years, it’s no wonder why cleanliness and hygiene have only grown in importance. Cleaning services are needed now more than ever, and the numbers show that. The global market for cleanindg services is expected to garner $74,299 million in 2022. With increasing demand, your cleaning business needs to hire the right people to get the job done and get it done well. Because the industry relies heavily on human workers rather than machines, improving your hiring process is one of the best ways to attract quality candidates. Here are a few ways you can refine your recruitment:

 

Find a skilled HR manager

Despite new technologies, cleaning businesses mainly rely on manpower and efficient staffing. As such, hiring a human resources manager is essential if you want a qualified and competent overseer for current and future employees alike. These professionals are in charge of all things related to workers and are vital in recruiting the right people. They are also an indispensable link between the higher-ups and the staff doing the everyday work.

Their hiring expertise is crucial, as a cleaning business can be very demanding in terms of labor; the more competent staff in your business, the more work can get done effectively. Do try to find an HR manager with some experience. If they have spent time in other cleaning businesses or manual labor-related industries, that can also be an advantage. 

 

Make use of the Internet

Gone were the days when paper flyers, banners, and billboards ruled the recruitment scene. If you want to tap into a larger talent pool, your website and social media accounts will play a significant role in attracting potential employees. Many job seekers are using social media to find jobs by showing off their capabilities and experience through posts, using job-seeking platforms, and checking a company’s accounts. Try to stay active on your social media so people can easily get a feel of the brand.

Your website is also vital in captivating candidates, so keeping it visually attractive and easy to navigate is critical to capturing someone’s attention. It’s a great way to tell people about who you are as a business and the kinds of cleaning personnel you’re looking for, and job seekers can see if they’re a good fit before applying. Pay attention to your website’s load times as well because if it takes too long for people to access your links or photos, they might click off immediately.

 

Be thorough with your job postings

People looking to join a cleaning business will be going through many potential companies and sifting through many job postings, so yours must stand out. Don’t be too vague or specific, as the two extremes will drive candidates away. Find a balance between providing essential information and making the job sound interesting.

One tip for writing job postings is to list the must-have, pertinent skills that are required for the job. This can help candidates zero in on the major needs of the role, which is ideal for hiring someone who can physically and mentally handle an arduous cleaning task.

Being transparent about the benefits and salaries can also be an excellent way to hook a job seeker’s attention and will be a significant factor in considering applying to your company.

A cleaning business can be tough to handle and manage, which is why you need the right strategies to make it profitable. A big part of keeping it going is who you have working for and with you, so making your hiring process as clean and smooth as the services you offer is essential for your company’s growth.

 

Exclusively written for SOUTHEASTSOFTWASH.com

By: Raziya Julian

The post How to Improve the Hiring Process for Your Cleaning Business appeared first on Southeast Softwash.

https://ifttt.com/images/no_image_card.png
https://www.southeastsoftwash.com/2023/01/31/how-to-improve-the-hiring-process-for-your-cleaning-business/

Efflorescence Removal – The Ultimate Guide

Efflorescence Removal and Prevention Tips for Brick Buildings

Brick buildings are a popular choice for commercial and residential structures due to their durability and aesthetic appeal. However, one issue that can affect the appearance of brick buildings is efflorescence. Efflorescence is a white, powdery deposit that can form on the surface of brick and other masonry materials. It is caused by water dissolving salts present in the brick or mortar, and then depositing them on the surface as the water evaporates.

Efflorescence can be unsightly and can also lead to long-term damage if left untreated. In this article, we will discuss the causes of efflorescence and provide tips for removing and preventing it.

Causes of Efflorescence

Efflorescence is caused by water that contains dissolved salts, such as sodium chloride and sulfates, coming into contact with brick or other masonry materials. The water can come from a variety of sources, such as:

• Rainwater that enters the building through cracks or holes in the mortar or brick
• Groundwater that seeps into the building through the foundation
• Water used during construction that is not properly removed

Removing Efflorescence

If efflorescence has already formed on the surface of your brick building, there are several methods for removing it. The most common method is to use a solution of Efflo-Go. The acid reacts with the salts in the efflorescence, dissolving them and allowing them to be washed away with a pressure washer.

It is important to note that Efflo-Go can be dangerous to use and should be handled with care. Always wear protective gear, such as gloves and goggles, and work in a well-ventilated area. It is also important to test the solution on a small, inconspicuous area before applying it to the entire surface.

Another method for removing efflorescence is to use a stiff brush and water to scrub the surface. This can be effective for removing surface-level efflorescence, but may not be as effective for efflorescence that has penetrated deeper into the brick.

Preventing Efflorescence

The best way to deal with efflorescence is to prevent it from occurring in the first place. Here are some tips for preventing efflorescence on your brick building:

• Seal the brick and mortar: Applying a sealer to the brick and mortar can help prevent water from penetrating the surface and causing efflorescence.
• Keep water away from the building: Make sure that gutters and downspouts are in good working order and that the ground around the building slopes away from the foundation to prevent water from seeping in.
• Remove water during construction: If you are having work done on your building, make sure that any water used during the construction process is properly removed and that the building is allowed to dry out before any sealers or coatings are applied.

By following these tips, you can help prevent efflorescence from forming on your brick building and keep it looking its best for years to come.

If you’re interested in how to remove red clay stains see the article here.

The post Efflorescence Removal – The Ultimate Guide appeared first on Southeast Softwash.

https://ifttt.com/images/no_image_card.png
https://www.southeastsoftwash.com/2023/01/23/efflorescence-removal-the-ultimate-guide/

What is the role of surfactants in soft washing?

 

What is a Surfactant?

A surfactant is a “surface acting agent” that weakens the surface tension of water, allowing it to spread out more easily and cover larger surfaces. This is why they are often used to make water “wetter.” Surfactants are made up of two parts, a hydrophilic (water-loving) head and a hydrophobic (water-hating) tail. When added to water, the hydrophilic head is drawn to the water while the hydrophobic tail tries to get away from it by getting closer to the surface, this action helps to loosen dirt and grime on the surface, making it easier to rinse away without scrubbing.

Surfactants are used in a variety of cleaning products, such as detergents and soaps, as well as personal care products like shampoos and body washes. They are also used in industrial applications, such as oil and gas production, to help mix oil and water and to help remove dirt and grime from surfaces.

Surfactants can also be used to emulsify, or mix, substances that do not normally mix together, such as oil and water. This makes them useful in a wide range of industries, including food, pharmaceuticals, and cosmetics.

Another important application of surfactants is in medicine. Some surfactants are used in the treatment of respiratory distress syndrome in newborns, as well as in lung surfactant replacement therapy for adults with lung disease.

In summary, surfactants are a versatile class of compounds that have many practical applications. They are used to weaken the surface tension of water, making it more effective at cleaning and removing dirt and grime. They are also used to emulsify and mix substances that do not normally mix together, and in the medical field for the treatment of respiratory disorders.

 

 

 

Why Southeast Softwash surfactant lineup is the economical and efficient surfactant option for cleaning roofs and substrates.

Southeast Softwash surfactants are the industry favorite for house washing and roof cleaning detergents.

They stick to what you spray them on and rinse clean from windows. 1 gallon of surfactant concentrate makes 15 gallons for your surfactant tank.

 

Check the reviews here

 

 

 

 

The post What is the role of surfactants in soft washing? appeared first on Southeast Softwash.

https://i0.wp.com/www.southeastsoftwash.com/wp-content/uploads/2021/02/IMG_1098-1.png?resize=747%2C561&ssl=1
https://www.southeastsoftwash.com/2023/01/16/what-is-the-role-of-surfactants-in-soft-washing/

Coty Yarbrough on the “How To Start A Pressure Washing Business” Podcast w/ Aaron Parker

Exposing the Dirty Truth: An Insider’s Look at the Softwash Industry with Coty Yarbrough of Southeast Softwash

Coty shares his unique perspective and insider knowledge on the industry, discussing everything from the latest technologies and techniques, to the challenges and misconceptions surrounding soft-washing. Listeners will gain a deeper understanding of the industry and learn how to make informed decisions when it comes to cleaning and maintaining their property. Tune in for an engaging and informative look at the world of softwashing with Coty Yarbrough.

Discussed:

• recent inventions and innovations from the Skunk Team
• why innovating is hard
• combatting limiting beliefs
• dealing with haters
• why long game is the main game
• super V ball for gas pumps/booster/air diaphram and the astonishing increased flow it gives with the Batch Buster Metering valve platform

Listen here or on Apple Podcasts

 

Also if you just happened to be interested in “How to remove red clay stains from concrete” check out this article here (with video)

The post Coty Yarbrough on the “How To Start A Pressure Washing Business” Podcast w/ Aaron Parker appeared first on Southeast Softwash.

https://ifttt.com/images/no_image_card.png
https://www.southeastsoftwash.com/2023/01/15/coty-yarbrough-on-the-how-to-start-a-pressure-washing-business-podcast-w-aaron-parker/

How To Remove Red Clay Stains From Concrete

There are several methods you can try to remove red clay stains from concrete. Here are some options:

1. Use a pressure washer: A pressure washer can be an effective tool for removing red clay stains from concrete. Start by sweeping or blowing off any loose dirt or debris from the surface. Then, set the pressure washer to a medium to high pressure setting and hold the nozzle about 6 inches from the stains. Work in a back and forth motion, starting at the top of the stain and moving downward. Rinse the area thoroughly with water to remove the stains and any remaining dirt or debris.
2. Use a commercial concrete cleaner: There are many commercial products available specifically designed for cleaning and removing stains from concrete surfaces. Follow the instructions on the product label, and use a scrub brush or pressure washer to work the cleaner into the stains. Rinse the area thoroughly with water to remove the cleaner and the stains.
3. Use a Mud May Day Stain Remover: For really tough set in red clay stains, use this professional chemical that will remove the red clay stain. Simply follow the directions on the jug, apply with a garden sprayer. Let dwell, and rinse away at medium pressure with a pressure washer.

 

 

Will Bleach Remove Red Clay Stains?

Since red mud and clay is not “organic growth” bleach will not remove or clean red clay stains from concrete. You will need a cleaner like Mud May Day to remove red clay stains from concrete. Applying bleach may kill the organic growth on the concrete, and pressure may rinse some surface dirt from the stain away, but deep set in red clay stains in concrete cannot be removed by using bleach.

It’s important to use caution when working with cleaning products, and to follow the instructions on the product label. Be sure to wear protective gloves and goggles, and work in a well-ventilated area.

Watch this video to see how to remove red clay stains from concrete: 

To see an in depth tutorial about how to clean your driveway click here. 

 

The post How To Remove Red Clay Stains From Concrete appeared first on Southeast Softwash.

https://i0.wp.com/www.southeastsoftwash.com/wp-content/uploads/2022/06/Mud-May-Day-Red-Clay-Stain-Remover.png?resize=300%2C251&ssl=1
https://www.southeastsoftwash.com/2023/01/06/how-to-remove-red-clay-stains-from-concrete/